Wiring is not a hobby! Always have a certified electrician perform any electrical work you require. A certified electrician will ensure your electrical work is done in a safe manner meeting the Ontario Hydro Safety code requirements.

It takes a qualified electrician to properly maintain and install electrical equipment.

Should an electrical related accident occur, the Ontario Ministry of Labour and Workers Compensation will investigate the accident thoroughly and will levy substantial heavy fines to an employer who is guilty of having an unqualified person performing electrical work.

The conduit and box are not secured to the wall. The box does not have a cover and exposed live wires are hanging out.

Silver duct tape was used to identify a green wire as being a neutral wire.

(Top left corner of picture) A neutral wire was run on the outside of the conduit.

The neutral wire feeding this pony panel should be white. It was run through the side of the pony panel without using a conduit or connector.

This pony panel is not grounded! The wires feeding this pony panel are not fused properly. No connectors were used for the flexible conduit feeding the pony panel.

Wires supplying this motor on an air compressor are not in a flexible conduit. The motor is not grounded properly. These wires are carrying 600 volts and have no mechanical protection. Very dangerous!.

The lighting fixtures are not grounded. The junction is not in a box. The wrong type of wire was used. Very Dangerous!

A pipe fitting was used. A plumber must have wired this one.

BX cable and box are not secured to wall properly. The box is missing a cover and exposed live wires are hanging out of the box. Very dangerous!

Messy installation of lighting fixtures. None of the fixtures are joined properly.

This picture was taken in the Dominican Republic. Too many faults to list.